frame

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Sign In Register

Modifying SWAP Memory

GiedriusGiedrius Administrator
SWAP memory is used to help RAM, once it cannot store any more data. The data which cannot be stored in RAM is then stored to SWAP memory in the hard disk. In this article, we will provide the basic steps on how to modify and increase SWAP memory in our KVM virtualization Linux VPS packages.

In general, there are different opinions on how much SWAP memory your server should have. It could be half of your RAM, the same amount or even more than RAM. In our article, we will assign 6 GB of SWAP to the server.


Allocating SWAP Memory

First thing you should do is to check if there is no SWAP memory in use on your server with the following command:
free -h

Your results will be printed in two lines: "Mem", "Swap", which will indicate, what the exact amount of RAM and SWAP memory is on the KVM server. The "Swap" line should only contain zeros. 


With the following command, we will allocate 6 GB of disk space for our SWAP memory:
fallocate -l 6G /swapfile

You can check if your SWAP memory was assigned with this command:
ls -lh /swapfile

At first, your SWAP may not be allocated due to permission issue and you might be seeing this message:

-rw-r--r-- 1 root root 6.0G Dec 5 14:32 /swapfile

This would suggest we have to make additional changes, first of which should be changing the permission of the swapfile:
chmod 600 /swapfile

After the change you can check the file permissions again:
ls -lh /swapfile

The results should change as well, comparing to the previous above:
-rw------- 1 root root 6.0G Dec  5 14:36 /swapfile

Now set the swapfile as Linux swap area:
mkswap /swapfile

Finally, enable SWAP usage:
swapon /swapfile

We can now check if the SWAP memory was allocated correctly:
free -h

Your results will print two lines again, just this time, you will see a line "Swap" having a variable of 6 GB.


Additional Options

In general, your SWAP memory allocation may stop working after you reboot the KVM server, so in order to save these changes permanently, we have to edit /etc/fstab. But first, we would recommend making a backup of this file:
cp /etc/fstab /etc/fstab.old

Once the backup is done, we have to make the changes to the actual file:
echo '/swapfile none swap sw 0 0' | sudo tee -a /etc/fstab

There are few extra options for SWAP memory, which we would like to address as well:

Option - swappiness, is used to describe when the system will move data to the SWAP file. The option may have a value from 0 to 100. Closer to 0, means that your data will be moved to SWAP only when it will be necessary.  Closer to 100 means that, data will be moved to SWAP more often, therefore leaving RAM memory more free. We would recommend keeping this option closer to 0, for example, 10.

You can check the current value with the following command:
cat /proc/sys/vm/swappiness

Option - vfs_cache_pressure, this option sets how often the information about the file system is updated. By default, it should be 100, but we would recommend using a lower value, for example, 50.

The current value can be checked with this command:
cat /proc/sys/vm/vfs_cache_pressure

Both of the additional options can be edited at the file /etc/sysctl.conf
by adding the following line at the bottom of the file:

vm.swappiness=10
vm.vfs_cache_pressure=50

If any questions remain, please contact our customer support, we will be glad to help.


Tagged:

Comments

  • I tried to follow this tutorial on my storage VPS with debian, however unsuccessful. I need a little more memory to build php7 with fileinfo, so how can I increase my memory temporarily if this isn't working?
  • GiedriusGiedrius Administrator
    edited April 2019
    This instruction is compatible only with our Linux VPS packages:

    Other packages Container VPS and Storage VPS can't use it because of the OpenVZ virtualization that they use.


  • Thank you Giedrius. So on this system it's not possible to temporarily increase the memory?
Sign In or Register to comment.

Time4VPS

Learn how to install a web and database server, email, FTP client or other applications. Discover and share information on server security or optimization recommendations.
Feel free to join our constantly expanding community, participate in discussions, strengthen your knowledge on Linux and Windows server management!
© 2013 - 2024 Time4VPS. All rights reserved.

Get In Touch